Airfix Scale Models
Airfix Scale Models
All products on the Airfix website.
 £2.19 In Stock | AA1897 - No 174 Signal Red - Satin - Tinlet No 1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA2240 - No 240 RLM02 Grau Matt - Tinlet No1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA2241 - No 241 RLM70 Schwartzgrun Matt - Tinlet No1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA2242 - No 242 RLM71 Dunkelgrun Matt - Tinlet No1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA2243 - No 243 RLM72 Grun Matt - Tinlet No1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA2244 - No 244 RLM73 Grun Matt - Tinelt No1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA2245 - No 245 RLM74 Graugrun Matt - Tinlet No1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA2246 - No 246 RLM75 Grauviollett Matt - Tinlet No1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA2247 - No 247 RLM76 Lichtblau Matt - Tinlet No1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA2248 - No 248 RLM78 Himmelblau Matt - Tinlet No1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA2249 - No 249 RLM79 Sandgelb Matt - Tinlet No1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA2251 - No 251 RLM81 Dunkelbraun Matt - Tinlet No1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA2252 - No 252 RLM82 Olivgrun Matt - Tinlet No1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA2253 - No 253 RLM83 Dunkel Grun Matt - Tinlet No1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 Out of Stock | AA6224 - No 186 Brown - Matt - Tinlet No 1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA6272 - No 191 Chrome Silver - Metallic - Tinlet No 1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 Out of Stock | AA6344 - No 196 Light Grey - Satin - Tinlet No 1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA6389 - No 200 Pink - Gloss - Tinlet No 1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA6392 - No 201 Black - Metallic - Tinlet No 1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA6608 - No 220 Italian Red - Gloss - Tinlet No 1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
