Airfix Scale Models
Airfix Scale Models
All products on the Airfix website.
 £2.19 In Stock | AA0057 - 57 Pastel Pink Matt - 14ml Enamel Paint Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA0058 - N0 58 Magenta - Matt - Tinlet No 1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA0059 - No 5 Dark Ad Grey - Gloss - Tinlet No 1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA0076 - No 7 Light Buff - Gloss - Tinlet No 1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA0103 - No 9 Tan - Gloss - Tinlet No 1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA0117 - No 10 Service Brown - Gloss - Tinlet No 1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA0120 - No 11 Silver - Metallic - Tinlet No 1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA0151 - No 14 French Blue - Gloss - Tinlet No 1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA0165 - No 15 Midnight Blue - Gloss - Tinlet No 1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA0173 - No 173 Track Colour - Matt - Tinlet No 1(14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA0179 - No 16 Gold - Metallic - Tinlet No 1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA0196 - No 18 Orange - Gloss - Tinlet No 1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA0206 - No 19 Bright Red - Gloss - Tinlet No 1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA0223 - No 20 Crimson - Gloss - Tinlet No 1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA0234 - No 234 Dark Flesh Matt - Tinlet No1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA0238 - No 238 Arrow Red - Gloss Tinlet No 1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA0239 - No 239 British Racing Green Gloss - Tinlet No1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA0268 - No 24 Trainer Yellow - Matt - Tinlet No 1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 Out of Stock | AA0271 - No 25 Blue - Matt - Tinlet No 1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
 £2.19 In Stock | AA0285 - No 26 Khaki - Matt - Tinlet No 1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
