All products on the Airfix website.
![]() £35.99 In Stock | A75010 - Afghan Single Storey House 1:48 Large single storey buildings with removable roof supports depicting a typical dwelling or storehouse found in Afghanistan. Suitable for all dioramas and war gaming. |
![]() £20.99 In Stock | A75012 - Narrow Road Bridge Broken Span Attacking and bombing bridges across Europe was a strategic necessity thoughout WWII and this model represents a typical ruined example that makes for excellent possibilities for modelling a superb diorama as well as war gaming features. |
![]() £19.99 In Stock | A75013 - Italian Farmhouse 1943 saw the Allies invading what was then still a hostile Italy, and this farmhouse is typical of those found across the south and central parts of the country. The three storeys and steps outside make for plenty of diorama and gaming opportunities. |
![]() £21.99 In Stock | A75014 - Italian Townhouse During the fierce battles in the narrow streets of many Italian towns, buildings like these were bombarded by both sides to try and extract dug-in troops. The layout of this building makes for some inspiring diorama work. |
![]() £35.99 In Stock | A75015 - Polish Bank Poland was attacked by Nazi Germany in September 1939, and this invasion sparked the start of World War II. The destruction caused by this and the later Soviet counter offensives during 1944 and 1945 meant many important buildings were ruined. This bank building typifies this destruction. |
![]() £19.99 In Stock | A75016 - Czech Restaurant Czechoslovakia was annexed by Nazi Germany in 1938, but it was not until the Soviet forces came streaming across from the east in 1944 and 1945 that massive destruction of cities, towns and villages took place. This restaurant building makes for a perfect focal point for modelling a scene from this period. |
![]() £24.49 In Stock | A75017 - European City Steps These city steps enable a huge scope of modelling opportunities to be created, and these steps can be found right across Europe. Great to be used in war gaming scenarios too. 1:76, 1:72 and larger scale figures can be used with these. |
![]() £49.99 Out of Stock | A76508 - AIRFIX CHALLENGE SOPWITH CAMEL Designed for a school group, Scout Cub Pack or any other young adult group this specially designed pack of kits and paints makes a great fun project. Please note if working individually in a lockdown situation, the paints will need decanting into smaller containers to allow all 15 users to have all the colours. Age recommendation for this model is 10 years due to the slightly more challenging bi-plane design. Contents and quantity within kit:
|
![]() £49.99 Out of Stock | A76509 - AIRFIX CHALLENGE FOKKER TRIPLANE Designed for a school group, Scout Cub Pack or any other young adult group this specially designed pack of kits and paints makes a great fun project. Please note if working individually in a lockdown situation, the paints will need decanting into smaller containers to allow all 15 users to have all the colours. Age recommendation for this model is 10 years due to the slightly more challenging bi-plane design. Contents and quantitiy within kit:
|
![]() £49.99 In Stock | A76510 - AIRFIX CHALLENGE WW1 MALE TANK Designed for a school group, Scout Cub Pack or any other young adult group this specially designed pack of kits and paints makes a great fun project. Please note if working individually in a lockdown situation, the paints will need decanting into smaller containers to allow all 15 users to have all the colours. Age recommendation for this model is 10 years due to the slightly more challenging design. Contents and quantity within kit:
|
![]() £8.99 In Stock | A78201 - Airfix 2021 Catalogue The 2021 Airfix Catalogue contains everything you need to know for all your kit modelling needs in 2021. As always, the Airfix Catalogue is also a collector's piece in it's own right for seasoned modellers and collectors! |
![]() £8.99 In Stock | A78202 - Airfix 2022 Catalogue The 2022 Airfix Catalogue contains everything you need to know for all your kit modelling needs in 2022. As always, the Airfix Catalogue is also a collector's piece in it's own right for seasoned modellers and collectors! |
![]() £2.19 In Stock | AA0014 - No 1 Grey Primer - Matt - Tinlet No 1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
![]() £2.19 In Stock | AA0028 - No 2 Emerald - Gloss - Tinlet No 1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
![]() £2.19 In Stock | AA0031 - No 3 Brunswick Green - Gloss - Tinlet No 1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
![]() £2.19 In Stock | AA0036 - No 36 Pastel Green - Matt - Tinlet No 1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
![]() £2.19 In Stock | AA0037 - 37 Bright Green Matt - 14ml Enamel Paint Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
![]() £2.19 In Stock | AA0042 - No 42 Pastel Violet - Matt - Tinlet No 1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
![]() £2.19 In Stock | AA0044 - No 44 Pastel Blue - Matt - Tinlet No 1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |
![]() £2.19 In Stock | AA0046 - No 46 Orange - Matt - Tinlet No 1 (14ml) Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml and 125ml tins for bigger jobs Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage: 14ml tin covers approx.0.3m depending on thickness of application Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour). |